English Translation of Title:
O-Ring for Water Jet Cutting Machine Parts – 19 x 31 x 0.6, Model No. 10142610-O-Ring-19-x-31-x-06.1253.3-1

Introduction, Application, Features, and Maintenance:

This component is an O-ring designed for water jet cutting systems. It is an elastomeric sealing ring with a circular cross-section, featuring dimensions of 19 mm inner diameter, 31 mm outer diameter, and 0.6 mm cross-section thickness.

Application:
Used as a static or dynamic seal in water jet cutting machines to prevent leakage of high-pressure water, abrasive slurry, or hydraulic fluid. Common installation points include high-pressure fittings, valves, pump connections, cylinder seals, and cutting head assemblies where a reliable seal is required.

Features:

• Provides an effective seal against high-pressure water, abrasive slurry, and hydraulic fluids.

• Manufactured from durable, chemically resistant elastomer compatible with water jet media.

• Circular cross-section ensures uniform compression and reliable sealing under pressure.

• Resistant to extrusion and deformation when properly installed in a properly designed gland.

• Easy to install and replace during routine maintenance.

Maintenance:

• Regularly inspect the O-ring for signs of wear, hardening, cracking, nicks, or extrusion.

• Check for leakage at the sealed joint during machine operation.

• Replace the O-ring immediately if any damage, deformation, or leakage is observed.

• Always use a new O-ring when reassembling components after disassembly.

• Clean the gland and sealing surfaces thoroughly before installation.

• Lubricate the O-ring lightly with compatible lubricant during installation to prevent damage.

• Store spare O-rings in a cool, dark place away from ozone and direct sunlight.