1/4" 3/8" 9/16" Waterjet Coning Threading Tool Set
For proper disassembly and installation of waterjet cutting equipment, specialized tools are required. These include high-pressure cylinder liner extractors, plunger removal tools, seal installation kits, and intensifier-specific wrenches. pumps require part-numbered items like the Seal Installation Tool Kit (20470475) and Low-Pressure Assembly Fixture Plate (014030-1). Additional tools include torque multipliers, end cap sockets, anti-seize lubricants, and high-pressure seal kits. Using correct tools prevents component damage, ensures proper sealing, and extends pump life. Always refer to the manufacturer's tool list before servicing.
Part Number | Tool Name | Purpose |
20470475 | Seal Installation Tool Kit | Installs HP seals, dynamic seals, and O-rings without damage |
HSEC | Hard Seal End Cap (Jackbolt) | Used for hard seal end cap removal and installation |
— | HP Cylinder Liner Removal Tool | Extracts high pressure cylinder liner (e.g., 20497767) |
— | Plunger Extraction Tool | Removes and installs ceramic plunger |
— | Low Pressure Seal Installer | Seats LP seals in hydraulic cylinder heads |
— | Tie Rod Nut Wrench | Tightens/loosens tie rod nuts on intensifier frame |
014030-1 | Low-Pressure Assembly Fixture Plate | Holds components during LP servicing |
002228-2 | Shift Pin Tool Assembly | Aligns and removes shift pin during disassembly |
— | Torque Multiplier | Provides extra torque for end cap nuts |
— | 1.5 inch Socket (0.5 inch drive) | Used with torque multiplier for large nuts |
— | 1 inch Socket (0.5 inch drive) | General disassembly of intensifier nuts |
— | 5/8 inch Socket (0.5 inch drive) | Smaller fasteners on pump assembly |
— | 1 inch Open-End Wrench | Hydraulic fitting and line removal |
— | 7/8 inch Open-End Wrench | End cap and component loosening |
— | 13/16 inch Open-End Wrench | High pressure fitting access |
— | 3/8 UNC Threaded Screws (4x) | Used with fixture plate for LP assembly |
— | Intensifier Assembly Tool (Pressure Loading Tool) | Compresses end cap onto tie rods during reassembly |
— | End Cap Nut Socket | Specialized socket for end cap nuts |
— | Rubber Mallet | Taps components loose without damage |
— | Slotted Screwdriver | General prying and adjusting |
— | 0.5 inch Drive Torque Wrench | Ensures proper torque on critical fasteners |
— | 0.5 inch Drive Ratchet | General ratcheting for disassembly |
— | Snap Ring Pliers | Removes retaining rings on piston assembly |
— | Hex Key Set (Metric/SAE) | Removes valve body and small fasteners |
Part Number | Material Name | Purpose |
A-2185 | Blue Lubricant | Thread lubrication during reassembly |
A-4689 | Food-Grade Grease | O-ring and seal lubrication |
A-10039 | Anti-Seize | Applied to tie rod threads and end cap nuts |
200006 | Parker Super O-Ring Lube | O-ring installation lubricant |
— | High-Pressure Seal Kit | Replacement seals (varies by model) |
Part Number | Kit Name | Contents |
014885-1 | Check Valve Outlet Replacement Kit | Valve seat, poppet, spring, O-rings |
014386-1 | HP Seal Kit | High pressure seals for cylinder |
014388-1 | LP Seal Kit | Low pressure seals for hydraulic section |
014389-1 | O-Ring Kit | Assorted O-rings for pump assembly |
1-14338 | Sealing Head Repair Kit (KM 75/100S) | HP seals for KMT intensifier |
INQUIRY
