English Translation of Title:
Water Jet Parts – High-Pressure Tee, 75 mm, Model No. 49832660-Water-Jet-Parts-HP-Tee-75.942.3-1

Introduction, Application, Features, and Maintenance:

This component is a high‑pressure tee fitting designed for water jet cutting systems. It features three connection ports arranged in a T‑shaped configuration, all with a 75 mm interface, allowing flow to be split or merged at a 90‑degree angle.

Application:
Used to divide or merge high‑pressure water or abrasive slurry flow in water jet cutting machines. Typical installations include supplying multiple cutting heads from a single pump, combining return lines, or integrating pressure sensors and bypass circuits.

Features:

• Rated for extreme pressures common in water jet cutting, up to 6,000 bar (87,000 psi).

• Three equal ports at 75 mm interface size, configured in a T shape.

• Allows 90‑degree branch flow from the main line with minimal pressure loss.

• Manufactured from high‑strength, corrosion‑resistant material suitable for abrasive water jet media.

• Precision‑machined sealing surfaces ensure leak‑free connections.

• Compact design facilitates integration into dense hydraulic layouts.

Maintenance:

• Regularly inspect all three ports and the tee body for signs of erosion, cracking, or leakage.

• Check for uneven flow or pressure drops at branch ports, which may indicate internal wear or blockage.

• Replace immediately if any surface pitting, thread damage, or visible wear is detected.

• Follow specified torque values when tightening all three connections.

• Use only compatible seals and washers during reassembly.