English Translation of Title:
Adapter for Water Jet Cutting Machine Parts – Hose to Pipe, 25 mm, Model No. 49830722-Adapter-HosePipe-25-x.1340.3-1

Introduction, Application, Features, and Maintenance:

This component is an adapter designed for water jet cutting systems. It converts between a hose connection and a standard pipe thread connection, both with a 25 mm nominal size, allowing components with incompatible connection types to be joined together.

Application:
Used to connect flexible hoses to rigid pipe systems in water jet cutting machines. Typical installations include between pump outlets, cooling water circuits, abrasive slurry return lines, or drain systems where a hose-to-pipe transition is required.

Features:

• Suitable for low to moderate pressure applications (not for ultra‑high‑pressure cutting lines).

• Converts between hose (barb or crimp-style) and standard pipe thread (NPT or BSP) connections.

• Both ends feature 25 mm nominal size for straight-through flow.

• Manufactured from corrosion‑resistant materials suitable for water and abrasive slurry exposure.

• Precision‑machined threads and sealing surfaces ensure leak‑free operation.

• Compact design for easy installation in confined spaces.

Maintenance:

• Regularly inspect the adapter body, hose connection, and pipe threads for signs of erosion, cracking, or corrosion.

• Check for leakage at both connection ends during machine operation.

• Replace immediately if any leakage, surface pitting, or thread damage is detected.

• Use compatible thread sealant or tape on the pipe thread side as required.

• Inspect the hose connection area for signs of wear or hose degradation.

• Follow specified torque values when tightening both connections.